Skip to Content
Language
Order before 4 P.M. Delivered the next working day Customer Service: +31 (0)525 685 500 .
| Workable Material | Ceramic, Composite, Engineered Stone, Granite |
|---|---|
| Machine type | CNC Machine |
| Usage | Wet |
| Diameter (mm) | 10 |
| Adapter (connection) | 1/2"R |
| Recommended feedrate (250 mm/min) | 400 |
| Recommended speed (rpm) | 9600 |
KGS flush fit cutter can be used for making a recessed edge. This is common for countertops, where a sink is to be installed. In addition, the cutter is also suitable for other applications where a small radius is required.
The diameter of the cutter is 10mm, the inside diameter 5mm and the diamond height is 10 mm with a ½" Gas connection. Suitable for use on CNC-machines.
The KGS flush fit cutter can be used on granite, composite and ceramic. The depth per passage is 0.8 - 1.0 mm.
The diameter of the cutter is 10mm, the inside diameter 5mm and the diamond height is 10 mm with a ½" Gas connection. Suitable for use on CNC-machines.
The KGS flush fit cutter can be used on granite, composite and ceramic. The depth per passage is 0.8 - 1.0 mm.
| Perfect for making a small radius in counter tops |
|---|
| Depth per run 0.8-1.00 mm. |
KGS Flush Fit cutter Ø10/5x10 1/2"Gas
Workable Material:
Ceramic, Composite, Engineered Stone, Granite
EAN:
8719067476711
Item Number:
34491
Stock:
In Stock
Order before 4 P.M. Delivered the next working day.
Free Deliveries on purchases over € 350,-.
KGS flush fit cutter can be used for making a recessed edge. This is common for countertops, where a sink is to be installed. In addition, the cutter is also suitable for other applications where a small radius is required.
The diameter of the cutter is 10mm, the inside diameter 5mm and the diamond height is 10 mm with a ½" Gas connection. Suitable for use on CNC-machines.
The KGS flush fit cutter can be used on granite, composite and ceramic. The depth per passage is 0.8 - 1.0 mm.
The diameter of the cutter is 10mm, the inside diameter 5mm and the diamond height is 10 mm with a ½" Gas connection. Suitable for use on CNC-machines.
The KGS flush fit cutter can be used on granite, composite and ceramic. The depth per passage is 0.8 - 1.0 mm.
| Workable Material | Ceramic, Composite, Engineered Stone, Granite |
|---|---|
| Machine type | CNC Machine |
| Usage | Wet |
| Diameter (mm) | 10 |
| Adapter (connection) | 1/2"R |
| Recommended feedrate (250 mm/min) | 400 |
| Recommended speed (rpm) | 9600 |
| Perfect for making a small radius in counter tops |
|---|
| Depth per run 0.8-1.00 mm. |
